Menu
Cart

BTC Chimera MK.III for V2 Gearboxes (No Bluetooth)

BTC-CH2-V2-NB
  • £125.00


User Manual

Trigger Programming Guide

The BlackTalon Concepts Chimera is a highly advanced user programmable compterized AEG MOSFET.

Built upon the indestructable Extreme-fire Lion, wired to a gearbox sensor array like the Systema PTW, and programmed to have more functions than any other controller on the market. Combine all this and you have the Chimera FET, an extremely powerful AEG controller with thousands of possible configurations. No soldering required!

The BTC Chimera is designed to provide highly advanced electronic fire control, extreme power handling and simple, drop-in installation.
It consists of two units: The main MOSFET computer board, and a trigger board. The main board contains most of the electronics; powerful solid-state switches, microprocessor, protection components etc. The trigger board contains the trigger switch, cut-off lever sensor and fire selector sensor, and replaces most of the stock trigger assembly.

This two-board arrangement brings many advantages over other drop-in MOSFETs because the main board can be bigger and therefore contain larger, more powerful components, increasing power handling and reliability. The trigger board now needs far fewer components, so the switches can be placed in the perfect positions without having to fit around other parts.

Advanced Technology
Can handle power surges up to 9000 watts and even run on car batteries.
Fully computerized with hi-speed dual ARM Cortex-M0 and PIC18F26K22 microprocessors.
Multiple internal layers of heavy copper traces for greater current capacity.
Short circuit detection and voltage spike suppression circuits to protect the controller.
Smart thermal management reduces heat buildup during sustained firing on certain settings.

MOSFET Trigger
Eliminates damaging electrical arcing of the trigger switch contacts.
Lower resistance compared to mechanical switching, increasing motor current.
Driven by a IRLS3034-7PPBF, the world's most powerful D2PAK-style MOSFET.

Dynamic Braking
Eliminates the motor spin-down time to prevent the piston from over-traveling.
Assists in keeping the piston properly reset to reduce stress on the gearbox.
Prevents double firing on semi-fire in extremely high RoF setups.
Also driven by the powerful IRLS3034-7PPBF MOSFET.

Cycle Completion
Gearbox always completes the last cycle regardless of when the trigger is released.
Assists in keeping the piston properly reset to reduce stress on the gearbox.
The motor will always have the smoothest and most consistent startup.
Allows the anti-reversal latch to be removed.

Configurable Triple Fire Select
All three fire select positions can be individually configured, for a total of 729 (9x9x9) possible configs.
Available options for each selector position:
Safe
Semi fire
Auto fire
Burst [non-interruptible]
Burst [interruptible]
Burst/Auto hybrid [burst non-interruptible]
Burst/Auto hybrid [burst interruptible]
Semi/Auto hybrid
Semi/Auto ramping
Non-interrupt burst completes a burst even if the trigger is released, whereas interruptable stops mid-burst.
Burst modes can be programmed to fire 2 - 10 shots per burst. Each selector can have different burst amounts.
"Burst/Auto hybrid" fires in burst and switches to full auto if the trigger remains held down.
Hybrid modes can be programmed to have no transition delay or a 0.2s - 1s delay.
"Semi/Auto ramping" fires in semi and switches to full auto if the trigger is rapidly tapped.

Hardware Semi-Only Lock
Can only be enabled/disabled by using a soldering iron to remove/bridge a solder jumper.
Conforms to semi-only laws that forbid AEGs with readily accessible means of bypassing semi-only.

Realistic RoF Control
Both fire select positions can be individually configured with a different RoF.
Every cycle runs at full speed and pauses between each shot to reduce the RoF.
Provides the most realistic feel and sound compared to any other forms of RoF reduction.

Adjustable Precocking
Precocking stops the piston in a compressed state so the next shot is near-instantaneous.
The precocking is fully adjustable and thus also compatible with short-stroked pistons.
Offers improved realism and trigger response for sniper or low RoF builds.

Adjustable Firing Interval
After a semi or burst fire, ignores trigger inputs for a certain amount of time. Programmable up to 1s.
Helps restrict rapid firing in specialized builds, such as limiting a sniper build to firing one shot per second.
Lower intervals can also help prevent accidental "bump firing" on semi when using a feather trigger.

LiPo / LiFePO4 Monitoring
Monitors LiPo and LiFePO4 batteries to cutoff power before overdischarge occurs.
Simply set the number of cells and the controller will use the proper cutoff voltage.

Programmable Digital Fuse
Sensor-based current monitoring negates the need for a physical fuse.
Cutoff threshold fully adjustable to help protect low-output batteries from over-current damage.

Gearbox Reliability
Eliminates the trigger jam normally caused by the cutoff lever stopping at a certain position.
The cutoff lever mechanism is no longer needed, greatly reducing the chances of semi-fire related issues.
The anti-reversal latch can also be removed to make gearbox reassembly much easier.

Please get in touch if you have any questions.